How to Stop CPU Overclocking? 5 Practical Methods

how to stop CPU overclocking
Spread the love

Boosting refers to the act of upping the clock speed of a computer’s processing unit (CPU) beyond its designated rate. Typically carried out to enhance performance this practice can also result in overheating and harm, to your CPU. If you’ve unintentionally pushed your CPU far or are facing problems arising from overclocking it’s crucial to understand how to halt it. In this article, we’ll delve into five approaches, for how to stop CPU overclocking and safeguard the efficiency and durability of your computer.

Why is Overclocking Bad?

Overclocking can give a short-term speed boost. It comes with risks. When you overclock a CPU it uses power. Produces extra heat leading to potential stability problems, system crashes, and even lasting harm. Moreover overclocking could void your computer’s warranty. Might not deliver enhancements in performance, for day-to-day activities.

The Risks of Overheating

When the CPU operates beyond its intended parameters, it generates extra heat. If the cooling gadget isn’t always geared up to deplete this heat, the CPU temperature can rise to dangerous degrees. This can cause thermal throttling, wherein the CPU reduces its speed to calm down, and in severe instances, may additionally purpose the CPU to fail totally.

Power Consumption and Component Stress

Another problem with overclocking is the increased power absorption required to increase the clock speed. This excess voltage can disturb the power supply unit (PSU) and other components, potentially causing hardware failure. Overclocking also puts additional stress on the CPU itself, potentially shortening its life.

Impact on System Stability and Warranty

System instability is a common result of overclocking. This includes random programming, blue screens of death (BSOD), and data corruption. Also, manufacturers often consider overclocking to be non-routine, therefore, it can void the warranty on your CPU or even your entire system.

How to Stop CPU Overclocking?

How to stop CPU overclocking? if you are in search of an answer to this question, here we discussed five practical methods to stop CPU overclocking. Learn these effective techniques to ensure stability and optimize performance for your computer system.

Method 1: Reset BIOS Settings

Reset BIOS Settings
Reset BIOS Settings

One way to prevent CPU overclocking is to reset your BIOS settings to their default configurations. The BIOS, short, for Basic Input/Output System serves as the firmware that controls the hardware of your computer and allows you to modify settings such, as the CPU clock speed.

Accessing the BIOS

To get into the BIOS you’ll have to reboot your computer and press a key when it starts up. The key you need to press may differ based on who made your motherboard. It’s typically DEL, F2, or F10. Timing is important, as the window for key presses is often short.

Locating the Reset Option

Once in the BIOS, go through the menus and find a way to reset the settings. They are often referred to as “Load Optimized Defaults”, “Load Fail-Safe Defaults”, or simply “Load Defaults”. This option will reset all settings to the initial state, including any overclocking settings.

Saving and Exiting

Select the reset option, save the changes, and exit the BIOS. To revert the changes simply press the F10 key to confirm your selection. The computer will then reboot using the BIOS settings effectively putting an end to the overclocking. This method is considered the way to stop CPU overclocking.

Method 2: Use Software to Monitor and Control CPU Speed

Use Software to Monitor and Control CPU Speed
Use Software to Monitor and Control CPU Speed

You can utilize overclocking tools such, as MSI Afterburner or Intel Extreme Tuning Utility to monitor and regulate your CPU speed. This feature enables you to modify parameters, like CPU clock speed, power, and various other settings.

Understanding Overclocking Software

The software, for overclocking, offers a to-use interface, for tweaking the CPU settings. It typically includes safety measures to avoid pushing your CPU beyond its limits. Nevertheless, caution is essential to prevent any harm.

Modifying CPU settings 

To stop overclocking, open the software and find a way to reset the CPU clock speed and power to default values. These procedures are generally clearly labeled and easy to use. Be sure to apply the changes and restart the computer if necessary.

CPU temperature control

These tools also typically have temperature control features. It is important to control CPU temperature when managing overclocking settings. If the temperature is above a safe level, it is a clear signal to reduce the clock speed or improve the cooling control.

Method 3: Disable Turbo Boost

Disable Turbo Boost
Disable Turbo Boost

Turbo Boost is a feature in many CPUs that allows you to increase your clock speed when needed temporarily. This can be more efficient but increases energy consumption and heat consumption. Enabling Turbo Boost prevents your CPU from actually overclocking.

What is turbo boost?

Intels Turbo Boost technology enables a CPU to operate at speeds, than the base clock speed, in situations. Its purpose is to enhance performance during tasks that require it although some users may experience overclocking consequences.

Going to Turbo Boost Settings

To disable Turbo Boost, you will need to go to the BIOS as described earlier. Once inside, head to the Advanced Settings or CPU Configuration menu where you should see the Turbo Boost option.

Enabling and saving settings

Select the Turbo Boost feature and select the disable option. Turn off Turbo Boost, save the changes, and exit the BIOS. Your computer will reboot, and the CPU won’t increase its clock speed.

Method 4: Check for System Stability Issues

If you’ve just boosted your CPU speed and it’s acting up you should look into problems. You could try running stress testing programs such, as Prime95 or AIDA64 to push your CPU and see if it holds up under the strain without any crashes or getting too hot.

Conducting stress tests

Stress testing software pushes your CPU to its limits to ensure it can perform stably on current systems. Run the software over time to simulate peak usage and watch for any signs of instability or overheating.

Interpretation of stress test results

The overclock can last indefinitely if the system is stable and the temperature remains within safe limits. However, any crash or overheating indicates that the overclock is too aggressive and should be slowed down or stopped.

Developing a practice based on consistency

If your system is found to be unstable, it is necessary to revert to default settings or adjust the overclock to a conservative level. Continuing to run an unstable system can lead to data loss and hardware damage.

Method 5: Remove Overclocking Hardware

If you used hardware such as a CPU cooler or liquid cooling system to overclock your CPU, removing it can stop the overclocking. These features are specifically designed to improve cooling and increase clock speed, so removing them can prevent your CPU from actually overclocking.

The role of cooling in overclocking

Efficient cooling solutions are often key to stable overclocks. High clock speeds can be maintained without overheating the CPU. If you remove these cooling systems, the CPU can’t safely sustain higher speeds.

Overclocking Components removed

Carefully remove any aftermarket coolers or other overclocking hardware you have installed. Make sure you replace enough coolant to prevent your CPU from overheating during normal operation.

Changing BIOS settings after a hardware change

You may need to go back to your BIOS settings after removing the overclocking hardware. If you are not up for cooling, you will likely need to reduce the CPU clock speed or disable any overclocking settings to ensure system stability.

Also Read: How to Fix CPU Fan Error? 8 Easy Methods


Overclocking may enhance performance for a period. It can lead to adverse effects as well. If your CPU is unintentionally overclocked or you are facing issues due, to overclocking it’s crucial to understand how to stop CPU overclocking. In this guide, we’ve covered five methods to avoid CPU overclocking, such as adjusting BIOS settings using monitoring software, for CPU speed activating Turbo Boost checking for system stability problems, and removing any hardware to prevent potential harm caused by overclocking.


How to stop CPU overclocking?
To prevent CPU overclocking you can reset your CPU to its settings, in the BIOS;
Find the overclocking options or a relevant section concerning CPU performance
Check for settings, like “CPU Ratio ” “Clock Speed,” or “Multiplier”
Restore these values to their default configurations
Save the adjustments and leave the BIOS/UEFI settings

How do I know if my CPU is overclockable?
To determine if your CPU can be overclocked you can compare the base frequency of your processor with its rated frequency, in Task Manager;
1. Open Task Manager.
2. Click on the Performance tab.
3. Locate your processor’s Base frequency.
4. If the base frequency is higher than the maximum rated frequency, your CPU is overclockable
Is overclocking a CPU safe?

Most simple and even necessary overclocks generally won’t affect your CPU in any meaningful way. You will also need to consider the quality of your motherboard, too. Because overclocking increases power consumption, you want to make sure your motherboard has enough voltage regulator modules (or VRMs) to handle it. For more information on how to stop CPU overclocking, read the five practical methods discussed above.

Leave a Reply

Your email address will not be published. Required fields are marked *